New Shape 2 IN 1 Infra-red Spout Sensor Activation Faucets and Side window Wave Sensor Soap Dispenser
- Infra-red Spout Sensor Activation for Water
- Wave Sensor Activation for Soap, Wave Onf (Side Sensor Window)
- Adjustment of Sensor Distance by Magnet
- Neoperl Aerator
- Timeout Protection
- Chrome Plated Finish
Wave Sensor Activation for Soap:
- Wave within the Sensor Range, Turn on Soap Dispenser, Soap Will Dispenser a certain amount.
Infra-red Sensor Activation:
- Hands within the Sensing Range, Turn on Faucet, Water Will Flow Out, Hands are Outside the Sensing Range, Turn off Faucet automatically, Water Will not Flow Out.
- Intelligent Identification Different Sensor Activation
Neoperl Aerator and Regulator:
- A Built-in Neoperl Aerator or Regulator in Spout or Water Outlet makes sure the flow is stable under varying water pressure
|Water Supply Pressure:||0.5Bar - 8Bar|
|Power Supply:||DC: 6V (4*AA Alkaline Battery); AC: 100V-240V, 50-60HZ; DC & AC|
Sensing for Water: 20-30CM(To White Board); Adjustable
Sensing for Soap: 8-12CM(To White Board); Adjustable
|Soap Viscosity:||1-3500 cps（mpa.s)|
0.5 seconds for the first gear
0.8 seconds for second gear
1.1 seconds for third gear
1.4 seconds for Fourth gear
|Soap Volume (under 170cps mpas soap viscosity):||
First gear: 0.8ml±0.2ml
Second gear: 1ml±0.2ml
Third gear: 1.25ml±0.2ml
Fourth gear: 1.5ml±0.2ml
The viscosity of the soap is different, the amount of liquid will be different, so the above data is for reference only
How to Use:
- Operation: Reach out to the bottom of the sensing area to discharge the water, leave the hand below the sensing area to turn off the water; each time it is used, the red indicator light flashes once;
- Under-voltage prompt: the indicator light flashes continuously, indicating that the battery is low, please change the battery.
- Timeout Protection: When used continuously for 60s±10%, the water will automatically shut off. If you need to use it again, please remove your hand and sense it again.
Adjustment of Sensor Distance by Magnet:
- Magnet close to the sensor
- Start the adjustment when the LED indicator illuminates continuously
- Put Hand(s) in the Position with the Distance Needed
- End the adjustment when the LED indicator stops illuminating
- 7 to 15 days for sample production
- 30 to 45 days for bulk production based on different quantities.
Packing Details (Standard Export Packing):
- Neutral Paper Box or Customized Packing Design
- One Piece Per Box, 8 Boxes In One
- By T/T, LC, Western Union Etc.
- International Express, DHL, TNT, UPS, FEDEX, By Air, By Sea or as customers' requests
- OEM and ODM service supported
Request a free quote
Feel free to write to us, and we will be back to you within 12 hours or sooner.
+86 0592 5927963
155, Dutian Road, Jimei District,
Xiamen, Fujian, China